- Street: Bronx
- City: Dalhousie
- Province: New Brunswick
- Postal Code: 10451
- Expires: 76 days, 12 hours
The lathe itself should Ultimate Small Shop Review have lots of cast iron and steel in its construction. Stamped metal parts tend to give little support. Good welds should be looked for. Check with your woodturning friends and find out what lathes they use for the type of turning you intend to do and then find out if they are satisfied. Good bearings are a must and even more important are the bearing housings. Bearings are easily replaced but not where they live in the lathe.
One of the best tests of sturdiness is common sense when looking at the lathe. If it looks solid it likely is. This would not be just a catalogue look but rather a chance to stand at it and see if the steel is substantial and the iron castings are solid and well finished. The mechanisms to hold the headstock, tailstock and tool rest should be strong and lock firmly. Speed controls should move easily and switches readily accessible.
7 total views, 2 today
Some other Other ads that you might be interested in...
That is a replay of what happened to Complete Strength CBD Tincture a couple of years ago. You are lucky to have discovered my site. […]October 7, 2019
No views yet